RD62X

FeaturesRD62X

Multiple Sites via IP
RD62X supports network connection via the IP port of repeater to form a private radio network to meet data and voice communication needs for wide-area coverage and dispersed locations.

Digital Audio Streaming of Dual Time Slots
RD62X supports the streaming of both the voice slots via the rear port accessory pins, allowing for capability expansion via future development.

Analog/Digital Operating Mode
RD62X supports operating mode in both Analog and Digital.

Analog Scan
The RD62X supports Analog voice and signaling scan, allowing coverage of different analog voice users from various groups.

Repeater Diagnostic And Control (RDAC)
RD62X supports Remote IP connection to monitor, diagnose and control the repeater, thus increasing maintenance efficiency. The Hytera developed RDAC is able to support multiple master network connections to allow the radio administrator to monitor multiple radio networks.

AC/DC Auto Switch
RD62X integrates an internal power supply that supports a battery floating charge. The power supports 13.6V±15% DC and 90V-264V AC. If the AC power is cut off, the DC power (battery) automatically takes over without interruption.

Analog/Digital Back-to-Back Interconnect
RD62X supports different operating modes of Analog and Digital to interconnect for voice cross patch, allowing Analog users to communicate to Digital users and vice versa. This allows for a smooth migration for Analog users to the digital world!

Multi CTCSS/CDCSS Decode
RD62X supports decoding up to a maximum of 16 CDCSS/CTCSS codes in Analog channels, allowing coverage for different Analog voice users from various groups.

Analog/Digital Telephone Interconnect
RD62X supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a Group or Private call to radio users. This feature utilizes the Commercial off the Shelf (COTS) Analog Phone Patch boxes and a Plain Old Telephone Service (POTS) line to connect the Repeater to the Corporate Office Phone System (PBX) or Public Switched Telephone Network (PSTN).

Analog/Digital Auto Switch
RD62X supports Analog and Digital channel auto switching, allowing for efficient frequency sharing between Analog and Digital users and an easy digital migration.

All-In-One Compact Design
RD62X’s compact design, integrates RF, Power supply, and duplexer into one box, which makes RD62X smaller, lighter, and easier for wall-mount installation and indoor coverage.

Repeater Access Management
RD62X supports a repeater access control feature allowing better security to prevent unauthorized users from accessing the radio network.

RD98X

Repeater Diagnostic And Control (RDAC)
RD98XRD98X* supports Remote (via IP port to connect to internet) and Local diagnostic (via USB) PC applications to monitor, diagnose and control the repeater status, thus increasing the maintenance efficiency. Hytera’s developed RDAC is able to support multiple master network connection to allow radio administrator to monitor multiple radio network upcoming!

Dual Slot digital audio streaming
RD98X* supports streaming of both the voice slots via the rear port accessory pins, allowing third party for capability expansion.

Analog Digital Autoswitch
RD98X* supports Analog and Digital channel auto switching, allowing efficient frequency sharing between Analog and Digital users during the digital migration.

IP Multi-site Connect
RD98X* supports network interconnect via the IP port of repeater to form a private radio network, allowing wide area coverage to meet dispersed locations data and voice communications.

50W high power
RD98X* supports maximum repeating power of 50W, and thus increasing the system coverage with lesser setup equipments.

16 channels
RD98X* supports maximum of 16 channels, allowing efficient radio network control at different scenarios. The channel change can be performed either via RDAC PC tools, via the repeater's front panels channel knob and via the channel steering from the repeater's rear port.

Analog/Digital Operating mode
RD98X* supports operating mode of Analog and Digital.

Analog/Digital back to back interconnect
RD98X* supports different operating mode of Analog and Digital to interconnect for voice cross patch, allowing Analog users to communicate to the Digital users and vice versa. This has allowed the smooth migration for Analog users to the digital world!

Analog Repeater Knockdown
RD98X* supports repeater knockdown, that when activated via the repeater's rear accessory pin, will disabled the transmit path of the repeater.

Multi-tone Decode
RD98X* supports decoding up to maximum of 16 CDCSS/CTCSS in Analog channels, allowing repeating of different Analog voice users from various groups.

Analog Scan
RD98X* supports Analog voice and signaling scan, allowing repeating of different Analog voice users from various groups.

Repeater Access Management
RD98X* supports radio users access control to the repeater, allows better security to prevent un-authorized users from accessing the radio network.

Analog/Digital Telephone Interconnect (via DTMF signaling)
RD98X*G supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a Group or Private call to radio users. This feature utilizes the Commercial Off The Shelf (COTS) Analog Phone Patch boxes and a Plain Old Telephone Service (POTS) line to connect the Repeater to the Corporate Office Phone System (PBX) or Public Switched Telephone Network (PSTN).

Continuous Wave Identification (CWID)
RD98X* supports Analog transmission of the repeater identification in Morse code format.

RD96X

Main FunctionsRD96X

Smart Battery (optional)
A 10Ah smart Li-Ion battery can support at least eight hours of work when working at 50% duty cycle and high TX power. Compatible with the smbus1.1 standard, RD96X can monitor battery conditions such as estimated remaining capacity, used capacity percentage, and usage record; the device can also maximize the battery life; through smart charge management, it can automatically recharge the battery for use anytime; powered by three levels of battery protection, the device considerably enhances charging safety and reliably.

Repeater Diagnostics and Control
Through a PC-based application, the product can monitor, diagnose and control remote (connected to the Internet via an IP port) and local repeaters (via a USB port), thus increasing the productivity. Hytera's RDAC software supports network access at multiple points and allows the administrator to monitor networked two-way radios.

Voice Input/output via Dual Time Slots: easy for monitoring and voice recording
In digital mode, the device supports voice input and output via dual time slots and enables users to record calls continuously.

Digital/analog Compatibility and Smart Switching
Back to back interconnection of digital & analog network can be achieved by wired or wireless IP, ensuring a smooth analog -to-digital transition.

Flexible Networking
By connecting geographically distributed repeaters that run at the same or different frequencies to form an IP-based and location-independent wireless communication network, IP-based repeater interconnection allows mobile radios to obtain voice and data services while roaming.

16 Channels
The product supports up to 16 channels. You can switch between channels using PCbased RDAC software, the channel selector knob on the front panel, or the external interface on the repeater.

Digital-analog Interconnection for Smooth Transition
The feature enables two-way radios with digital and analog capabilities, and digital and analog users to intercommunicate in different operating modes to guarantee users' seamless transition from analog to digital capabilities.

GPS
The GPS module supports GPS data transmission and enables emergency command centers to monitor the location of a small mobile network in real time.