IC-F3102D / IC F4102D

Everything you expect in a business radioIC-F3102D ... Plus Digital!

Non-slip, large PTT
The large PTT button is designed to provide non-slip, confident-click, even wearing gloves.

800mW loud audio
The large 45mm speaker delivers up to 800mW* of loud audio! Digital modulation adds distinct clarity to received voices.
* Typical with internal speaker.

Long lasting battery life
The IC-F3102D series has three types of battery packs and case to choose from.
Lithium-Ion (Li-Ion) battery pack, BP-265, Nickel metal hydride (Ni-MH) battery pack, BP-264 and battery case, BP-263 are selectable for your preference.

Channel announcement
When you rotate the channel knob, the radio announces the channel number. Convenient for making radio adjustments without having to look at the radio.

Bright 3-Color LED
The bright LED shows the operating status: red for transmit, green for listening, or orange for low battery, etc.
Hands-free operation
Optional headset with plug adapter cable OPC-2004 provides hands-free operation.

Built military rugged!
Okay to use in the rain! Tested to IP54 and 11 categories of MIL STD-810 F environmental tests.

Compact and light weight
58×111.5×36.5 mm
320g/310g with BP-265. (VHF/UHF)

IDAS™ digital mode operation
The IC-F3102D series provides basic operation in NXDN™ CAI-based IDAS digital mode. It is also compatible with IDAS multi-site conventional and IDAS single-site trunking. The following IDAS features are programmable.

  • PTT ID (TX)
  • Individual/Group call (TX)IC-F4102D
  • Block decode
  • RAN (Radio Access Number)
  • Radio check (RX)
  • Stun/kill/revive (RX)
  • Call alert (RX)
  • Remote monitor (RX)
  • Emergency (TX)
  • Digital voice scrambler
  • GPS (TX only with HM-171GP)
  • TX: Transmit, RX: Receive
  • Built-in 2-Tone and 5-Tone (Analogue mode)

2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions. The radio stun and kill functions disable a radio over the air and the revive function restores the stunned radio.

Scan features
The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The transmit channel and talk back functions allow you to make a quick response while scanning.

Other features

  • CTCSS/DTCS encoder/decoder*
  • BIIS PTT ID transmission*
  • MDC PTT ID and emergency*
  • DTMF autodial
  • Low battery alert
  • 2-step power save
  • PC programmable
  • Time out timer
  • Talk around function
  • Lone worker function
  • Surveillance function
  • Forced narrow function*
  • * analogue only



512 memory channels with 128 zones
The 512 memory channel capacity with 128 zones allows you to divide and store a variety of channel groupings for versatile and efficient fleet management.

IDAS digital mode ready
IDAS (Icom Digital Advanced System) is Icom’s digital land mobile system using the 6.25kHz narrowband FDMA technology. IDAS has choice of an NXDN™ protocol or an ETSI dPMR™ protocol.

Dot matrix, multi-function LCD
The IC-F3162 series has a large dot matrix display to show information with high resolution characters. The display setting is programmable to show one line and 12 characters, or two lines and 24 characters. The bottom row shows assigned functions to the [P0] to [P3] buttons.

Voting operation (Analogue mode only)
The voting mode scanning detects the signal strength level of repeater stations and automatically selects the strongest station, useful for roaming between 2 or more repeater sites. Once you program the voting mode to a memory zone, you can easily start voting mode operation by changing the zone setting.

Loud audio output with BTL amp
The IC-F3162 series employs a BTL amplifier that increases the audio output and the built-in audio compander provides clear, low noise communications.

Other features

  • Built-in LTR™ trunking and MDC 1200 capability*     (* Depending on version)
  • Built-in inversion type voice scrambler and optional UT-109R and UT-110R for higher securityIC-F4162DT-DS
  • Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.
  • The mode independent setting automatically selects the scanning list, according to the operating channel

Nuisance delete
IP55 dust-protection and water jet resistance
Optional man down unit, UT-124R and lone worker function
and more...

IDAS and IDAS logo are trademarks of Icom Incorporated.
NXDN is a trademark of Icom Incorporated and JVC KENWOOD Corporation.
LTR is a trademark of E.F. Johnson Technologies Inc.
All other trademarks are the properties of their respective holders.


IP67 Waterproof & Dustproof ProtectionIC-F3262DT-DS
IP67 Waterproof & Dustproof Protection The IC-F3262D series provides protection against dust and water that is equivalent to IP67. The radio can withstand 1m depth of water for 30 minutes.

Man Down and Lone Worker Functions for Emergency Call
The man down function* automatically sends an emergency signal when the transceiver is left in a horizontal position. The lone worker function also can transmit an emergency signal when the radio is not operated for a preset period. These emergency signals can be sent with GPS position data* to alert your co-workers or dispatch of any potential trouble.
* Depending on version.

800mW (typ.) Audio Output Power
800mW (typ.) Audio Output Power The built-in BTL amplifier doubles the audio output power and the large 40mm speaker delivers loud 800mW (typ.) audio to receive all calls under noisy environments.

Built-in GPS Receiver*
GPS Receiver Your current position data can be attached to a voice or data (SDM, status or emergency signal) transmission and can be sent to dispatch stations*.

Built-in GPS Receiver

  • Depending on version.
  • To graphically show the received position data, an external PC application is required.

14-pin Accessory Connector
14-pin Accessory Connector The new 14-pin accessory connector enhances audio output capabilities with the built-in BTL amplifier. The optional HM-184 speakermicrophone has a 1000mW (typ.) audio output for loud and clear communications.

Large Full Dot-Matrix LCD
Using a large full dot-matrix LCD (32 × 18mm), the IC-F3262D series shows two lines of easy-to-read text messages. The bottom row shows assigned functions to the [P0] to [P3] buttons.

Long Lasting Battery Life

  • GPS type
  • Operating Time
  • Built-in GPS type    10.5 hours (approx.)
  • Non GPS type    12 hours (approx.)
  • * Digital mode typical operation in 5:5:90 duty cycle, power save on.
  • dPMR™ Features

The IC-F3262D series* meets dPMR standards (TS 102 658) and provides dPMR Tier 2 Mode 1/2/3 operation. The following dPMR features are programmable.IC-F4262DT-DS

  • Individual/group call
  • All group call
  • Emergency
  • Call log
  • Status message
  • SDM (Short Data Message)
  • GPS
  • Stun, kill and revive
  • Digital voice scrambler
  • Transparent data mode
  • * dPMR version only.
  • Call Setup and Clear Down

The "Call setup and clear down" which is used in 5-Tone or BIIS signaling in analogue radios is implemented in the dPMR system. The IC-F3262D series confirms availability of the destination radio before you talk. 5-Tone or BIIS users can introduce dPMR without hesitation and avoid a new learning curve with these radios.

Transparent Data Modem Function
When IC-F3262D series is connected to a PC or other external equipment, the transparent data modem function allows communication in a 6.25kHz channel. It can be used for remote telemetry system control or data applications.

Built-in Voice Scrambler
The built-in inversion voice scrambler* provides secure conversation in analogue mode. When using IDAS digital mode, the digital voice scrambler provides a 15-bit key (about 32,000 codes) as standard.
* Inversion voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.

Status Messages
The IC-F3262D series has 32 programmable status messages. The status messages can be used as special functions to control the radio such as ambience listening (Auto TX), radio stun/kill/revive and GPS position reporting/request.

Other features

  • 512 memory channels with 128 zones
  • 5W output power both in VHF and UHF
  • Built-in 2-Tone, 5-Tone and BIIS 1200*
  • CTCSS/DTCS encoder/decoder*
  • MIL-STD 810 G rugged construction
  • 8 DTMF autodial memories
  • Tactical group function
  • Busy channel lockout, repeater lockout
  • Power on password
  • Time-out timer
  • Talk around function
  • Low battery alert
  • Escalating alarm
  • Surveillance function
  • (* = Analogue mode only)

Supplied accessories (May differ according to version)

  • Battery pack, BP-232WP
  • Belt clip, MB-94R
  • Antenna